Routing Static Degan 2 Router

Router Kiri

Router>en
Router#config t
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#int se2/0
Router(config-if)#ip address 202.45.67.1 255.255.255.192
Router(config-if)#clock rate 72000
This command applies only to DCE interfaces
Router(config-if)#no shut

%LINK-5-CHANGED: Interface Serial2/0, changed state to down
Router(config-if)#exit
Router(config)#int fa0/0
Router(config-if)#ip address 192.10.10.1 255.255.255.192
Router(config-if)#no shut

Router>en
Router#config t
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#ip route 192.20.20.0 255.255.255.192 202.45.67.2

Router Kanan

Router>en
Router#config t
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#int se2/0
Router(config-if)#ip address 202.45.67.2 255.255.255.192
Router(config-if)#clock rate 72000
Router(config-if)#no shut

Router(config-if)#
%LINK-5-CHANGED: Interface Serial2/0, changed state to up

Router(config-if)#exit
Router(config)#int fa0/0
Router(config-if)#ip address 192.20.20.1 255.255.255.192
Router(config-if)#no shut

Router>en
Router#config t
Enter configuration commands, one per line.  End with CNTL/Z.
Router(config)#ip route 192.10.10.0 255.255.255.192 202.45.67.1

Kemudian lakukan ping antar workstation

Workstation kanan ke kiri

C:\>ping 192.10.10.2

Pinging 192.10.10.2 with 32 bytes of data:

Reply from 192.10.10.2: bytes=32 time=22ms TTL=126
Reply from 192.10.10.2: bytes=32 time=1ms TTL=126
Reply from 192.10.10.2: bytes=32 time=1ms TTL=126
Reply from 192.10.10.2: bytes=32 time=13ms TTL=126

Ping statistics for 192.10.10.2:
    Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 1ms, Maximum = 22ms, Average = 9ms